[1] Vassiliou V, Barboutis I. Bending strength of furniture corner joints constructed with insert fittings[J]. Forestry and Wood Technology, 2009, 67: 268−274.
[2] Derikvand M, Ebrahimi G. Strength performance of mortise and loose-tenon furniture joints under uniaxial bending moment[J]. Journal of Forestry Research, 2014, 25(2): 483−486. doi: 10.1007/s11676-014-0479-5
[3] Veysi J, Ghanbar E, Mohsen B. A study of the effects of height and thickness of tenon made out of beech and hornbeam on bending strength of mortise and tenon joint[J]. Iranian Journal of Wood & Paper Science Research, 2010, 25(1): 128−137.
[4] 李敏, 吴智慧, 张继雷. 现代红木家具中直角榫榫卯配合尺寸关系分析[J]. 木材工业, 2016, 30(4):29−32. doi: 10.3969/j.issn.1001-8654.2016.04.007Li M, Wu Z H, Zhang J L. Tolerance and fit of rectangular mortise and tenon in modern hongmu furniture production[J]. China Wood Industry, 2016, 30(4): 29−32. doi: 10.3969/j.issn.1001-8654.2016.04.007
[5] 陈新义, 刘文金, 孙德林, 等. 梓木构件双圆榫接合性能优化研究[J]. 林产工业, 2014, 41(6):31−33. doi: 10.3969/j.issn.1001-5299.2014.06.008Chen X Y, Liu W J, Sun D L, et al. Optimization of double dowel of catalpa wood components joint performance[J]. China Forest Products Industry, 2014, 41(6): 31−33. doi: 10.3969/j.issn.1001-5299.2014.06.008
[6] 钟世禄, 关惠元. 椭圆榫过盈配合量与木材密度的关系[J]. 林业科技开发, 2007(2):57−59. doi: 10.3969/j.issn.1000-8101.2007.02.018Zhong S L, Guan H Y. Relationship between optimal value of interference fit and wood density in oval tenon joint[J]. China Forestry Science and Technology, 2007(2): 57−59. doi: 10.3969/j.issn.1000-8101.2007.02.018
[7] 宋俞成, 朱丽华, 马贞, 等. 梓木家具圆榫接合抗拔强度影响因素试验研究[J]. 林产工业, 2014, 41(3):20−23. doi: 10.3969/j.issn.1001-5299.2014.03.006Song Y C, Zhu L H, Ma Z, et al. Study on tensile strength influence factors for round tenon joint of catalpa wood furniture[J]. China Forest Products Industry, 2014, 41(3): 20−23. doi: 10.3969/j.issn.1001-5299.2014.03.006
[8] 胡文刚, 白珏, 关惠元. 一种速生材榫接合节点增强方法[J]. 北京林业大学学报, 2017, 39(4):101−107.Hu W G, Bai J, Guan H Y. Investigation on a method of increasing mortise and tenon joint strength of a fast growing wood[J]. Journal of Beijing Forestry University, 2017, 39(4): 101−107.
[9] 陈于书, 刘娜. 桉木多层板插接结构T型构件力学强度的研究[J]. 林产工业, 2017, 44(10):21−26.Chen Y S, Liu N. Study on mechanical strength of eucalyptus multi-layer boards interlocking structure T-shaped specimens[J]. China Forest Products Industry, 2017, 44(10): 21−26.
[10] 李吉庆, 张齐生, 陈礼辉. 竹集成材家具木圆榫接合强度的研究[J]. 西南林业大学学报, 2011, 31(6):74−77. doi: 10.3969/j.issn.2095-1914.2011.06.018Li J Q, Zhang Q S, Chen L H. Study on joint intensity of wood tenon of laminated bamboo furniture[J]. Journal of Southwest Forestry University, 2011, 31(6): 74−77. doi: 10.3969/j.issn.2095-1914.2011.06.018
[11] 胡文刚, 关惠元. 基于摩擦特性的榫接合节点抗拔力研究[J]. 林业工程学报, 2017, 2(4):158−162.Hu W G, Guan H Y. Investigation on withdrawl force of mortise and tenon joint based on friction properties[J]. Journal of Forestry Engineering, 2017, 2(4): 158−162.
[12] 关惠元. 现代家具结构讲座(第六讲): 非木质家具结构[J]. 家具, 2007(6):50−59.Guan H Y. Lecture on modern furniture structure (lecture 6): non-wood furniture structure[J]. Furniture, 2007(6): 50−59.
[13] 王安正, 关惠元. 基于响应面法的塑料椅板式构件优化设计研究[J]. 塑料工业, 2019, 47(1):69−73. doi: 10.3969/j.issn.1005-5770.2019.01.015Wang A Z, Guan H Y. Study on the optimization of flat plastic chair component based on the response surface methodology[J]. China Plastic Industry, 2019, 47(1): 69−73. doi: 10.3969/j.issn.1005-5770.2019.01.015