[1] 王丽宇, 鹿振友, 张明辉, 等. 木材干燥后的裂纹与断裂[J]. 木材工业, 2002, 16(2):26−28. doi:  10.3969/j.issn.1001-8654.2002.02.008

Wang L Y, Lu Z Y, Zhang M H, et al. Cracks and fractures after wood drying[J]. Wood Industry, 2002, 16(2): 26−28. doi:  10.3969/j.issn.1001-8654.2002.02.008
[2] 王丽宇. 木材裂纹扩展及其断裂行为的研究[D]. 北京: 北京林业大学, 2002.

Wang L Y. Research on crack propagation and fracture behavior of wood[D]. Beijing: Beijing Forestry University, 2002.
[3] 费本华, 张东升. 木材断裂裂纹及应力场的分形研究[J]. 木材工业, 2003, 17(3):7−12. doi:  10.3969/j.issn.1001-8654.2003.03.003

Fei B H, Zhang D S. Fractal study on crack and stress field of wood[J]. Wood Industry, 2003, 17(3): 7−12. doi:  10.3969/j.issn.1001-8654.2003.03.003
[4] 孙艳玲, 张青, 赵东. 木材裂纹尖端应力、应变场的数值分析[J]. 北京林业大学学报, 2010, 32(1):103−107.

Sun Y L, Zhang Q, Zhao D. Numerical analysis of stress and strain fields at the crack tip of wood[J]. Journal of Beijing Forestry University, 2010, 32(1): 103−107.
[5] 邵卓平. 木材和竹材的断裂与损伤[D]. 合肥: 安徽农业大学, 2009.

Shao Z P. Fracture and damage of wood and bamboo[D]. Hefei: Anhui Agricultural University, 2009.
[6] 鹿振友. 断裂力学在木材加上的应用[J]. 北京林业大学学报, 1988, 10(3):49−56.

Lu Z Y. Application of fracture mechanics in wood addition[J]. Journal of Beijing Forestry University, 1988, 10(3): 49−56.
[7] Wu E M. Application of fracture mechanics to anisotropic plates[J]. Journal of Applied Mechanics, 1967, 34(4): 967−974. doi:  10.1115/1.3607864
[8] 鹿振友, 王丽宇, 刘艳. 白桦材断裂韧度的各向异性性质[J]. 力学与实践, 2004, 26(4):47−49. doi:  10.3969/j.issn.1000-0879.2004.04.014

Lu Z Y, Wang L Y, Liu Y. Anisotropic properties of fracture toughness of white birch[J]. Mechanics and Engineering, 2004, 26(4): 47−49. doi:  10.3969/j.issn.1000-0879.2004.04.014
[9] 邵卓平, 任海青, 江泽慧. 木材横纹理断裂及强度准则[J]. 林业科学, 2003, 39(1):119−125. doi:  10.3321/j.issn:1001-7488.2003.01.020

Shao Z P, Ren H Q, Jiang Z H. Fracture and strength criterion of wood horizontal texture[J]. Scientia Silvae Sinicae, 2003, 39(1): 119−125. doi:  10.3321/j.issn:1001-7488.2003.01.020
[10] 范文英, 徐虹, 龚蒙. 木材断裂韧性KIC测定方法的研究[J]. 南京林业大学学报(自然科学版), 1993, 17(3):80−82.

Fan W Y, Xu H, Gong M. Study on the determination method of wood fracture toughness KIC[J]. Journal of Nanjing Forestry University (Natural Science Edition), 1993, 17(3): 80−82.
[11] 林兰英, 何盛, 傅峰, 等. 基于图像处理微波处理材裂纹评价[J]. 林业科学, 2014, 50(4):84−89.

Lin L Y, He S, Fu F, et al. Evaluation of cracks in microwave processing materials based on image processing[J]. Scientia Silvae Sinicae, 2014, 50(4): 84−89.
[12] Choi D, Thorpe J L, Hanna R B. Image analysis to measure strain in wood and paper[J]. Wood Science & Technology, 1991, 25(4): 251−262.
[13] Yates J R, Zanganeh M, Tai Y H. Quantifying crack tip displacement fields with DIC[J]. Engineering Fracture Mechanics, 2010, 77(11): 2063−2076. doi:  10.1016/j.engfracmech.2010.03.025
[14] Strojecki M, Łukomski M, Colla C, et al. Acoustic emission as a non-destructive method for tracing damage: from laboratory testing to monitoring historic structures[J]. RILEM Bookseries, 2012, 6: 1131−1136.
[15] 张志研. 木材损伤的声发射特征及裂纹扩展机理研究[D]. 北京: 北京林业大学, 2009.

Zhang Z Y. Study on acoustic emission characteristics and crack propagation mechanism of wood damage[D]. Beijing: Beijing Forestry University, 2009.
[16] Hu M, Johansson M, Olsson A, et al. Local variation of modulus of elasticity in timber determined on the basis of non-contact deformation measurement and scanned fibre orientation[J]. European Journal of Wood and Wood Products, 2015, 73(1): 17−27. doi:  10.1007/s00107-014-0851-3
[17] Nagai H, Murata K, Nakano T. Strain analysis of lumber containing a knot during tensile failure[J]. Journal of Wood Science, 2011, 57(2): 114−118. doi:  10.1007/s10086-010-1154-x
[18] Keunecke D, Novosseletz K, Lanvermann C, et al. Combination of X-ray and digital image correlation for the analysis of moisture-induced strain in wood: opportunities and challenges[J]. European Journal of Wood and Wood Products, 2012, 70(4): 407−413. doi:  10.1007/s00107-011-0573-8
[19] 王丽宇, 鹿振友, 赵东, 等. 白桦材LT型裂纹的演化与增长行为的研究[J]. 北京林业大学学报, 2002, 24(2):61−63.

Wang L Y, Lu Z Y, Zhao D, et al. Study on evolution and growth behavior of LT cracks in white birch[J]. Journal of Beijing Forestry University, 2002, 24(2): 61−63.
[20] 张喆. 数字散斑相关法测量木材断裂韧性的应用研究[D]. 北京: 北京林业大学, 2013.

Zhang Z. Application of digital scattered work correlation method to measure fracture toughness of wood[D]. Beijing: Beijing Forestry University, 2013.
[21] Beall F C. Overview of the use of ultrasonic technologies in research on wood properties[J]. Wood Science & Technology, 2002, 36(3): 197−212.
[22] Aicher S, HoFflin L, Dill-Langer G. Damage evolution and acoustic emission of wood at tension perpendicular to fiber[J]. Holz als Roh-und Werkstoff, 2001, 59(1−2): 104−116. doi:  10.1007/s001070050482
[23] Booker J D. Acoustic emission related to instantaneous strain in Tasmanian eucalypt timber during seasoning[J]. Wood Science & Technology, 1994, 28(4): 249−259.
[24] Ardalany M, Deam B, Fragiacomo M. Experimental results of fracture energy and fracture toughness of radiata pine laminated veneer lumber (LVL) in model I (opening)[J]. Materials and Structures, 2012, 45(8): 1189−1205. doi:  10.1617/s11527-012-9826-1
[25] 邵卓平, 陈品, 查朝生, 等. 木材损伤断裂过程的声发射特性与Felicity效应[J]. 林业科学, 2009, 45(2):86−91. doi:  10.3321/j.issn:1001-7488.2009.02.016

Shao Z P, Chen P, Zha C S, et al. Acoustic emission characteristics and felicity effect of wood damage and fracture process[J]. Scientia Silvae Sinicae, 2009, 45(2): 86−91. doi:  10.3321/j.issn:1001-7488.2009.02.016
[26] Diakhate M, Bastidas-Arteaga E, Moutou P R, et al. Cluster analysis of acoustic emission activity within wood material: towards a real-time monitoring of crack tip propagation[J]. Engineering Fracture Mechanics, 2017, 180: 254−267. doi:  10.1016/j.engfracmech.2017.06.006
[27] Zhang H, Fu D H, Song H P, et al. Damage and fracture investigation of three-point bending notched sandstone beams by DIC and AE techniques[J]. Rock Mechanics and Rock Engineering, 2015, 48(3): 1297−1303. doi:  10.1007/s00603-014-0635-4
[28] Lu Y L, Li W S, Wang L G, et al. In-situ microscale visualization experiments on microcracking and microdeformation behaviour around a pre-crack tip in a three-point bending sandstone[J]. International Journal of Rock Mechanics and Mining Sciences, 2019, 114: 175−185. doi:  10.1016/j.ijrmms.2019.01.002
[29] Farhidzadeh A, Mpalaskas A C, Matikas T E, et al. Fracture mode identification in cementitious materials using supervised pattern recognition of acoustic emission features[J]. Construction and Building Materials, 2014, 67: 129−138. doi:  10.1016/j.conbuildmat.2014.05.015
[30] Wildemann V E, Spaskova E V, Shilova A I. Research of the damage and failure processes of composite materials based on acoustic emission monitoring and method of digital image correlation[J]. Solid State Phenomena, 2015, 243: 8.
[31] Malumbela G, Alexander M, Moyo P. Lateral deformation of RC beams under simultaneous load and steel corrosion[J]. Construction and Building Materials, 2010, 24: 17−24. doi:  10.1016/j.conbuildmat.2009.08.005