Changes of the internal characteristics of knots in larch plantation
-
摘要: 以落叶松人工林为研究对象,采用枝解析和节子剖析技术,获取了95株解析木和2 165个节子数据,以树木和节子自身因子为自变量建立了节子内部特征模型,包括节子直径和角度模型、节子中健全节和疏松节长度模型。模型很好地描述了节子内部特征因子的变化规律,揭示了节子内部特征因子随林木和自身变量变化的机制。结果表明:节子直径、节子角度和健全节长度都随着其所在位置高度的增加而增大,随着树木胸径的增大而增大;疏松节长度随着胸径的增大呈现增大趋势,但节子自身直径大小对其影响也较大。应用独立检验样本对所建模型进行检验,精度达到了95%以上,这些模型可以应用到林木生长模拟系统中,增加模拟效果。节子内部特征变化规律的研究也有助于揭示枝条的生长与死亡机制,对开展整枝抚育从而提高木材质量有重要意义。Abstract: The data of 95 sample trees and 2 165 knots in larch(Larix spp.)plantation were acquired using branch and knot analysis techniques. Using tree and knot factors as independent variables, we developed four models for internal characteristics of knots (ICK), including the knot diameter model, knot angle model, the sound knot length model and loose knot length model. The models described well the changing patterns of factors of ICK, and revealed the mechanism of ICK changes with trees and itself. The results showed that the knot diameter, angle and sound knot length increased with the increase of the height of knot position and DBH. Loose knot length increased with DBH increasing, however the knot itself also had great impact on loose knot length. The results of independent validation showed that prediction precision of each model reached over 95%, thus these models can be applied to forest growth simulation system for increasing the effect of simulation. The studies on variation patterns of ICK also help to reveal the mechanism of branch growth and death, which is of important significance to carry out pruning and therefore improve wood quality.
-
Key words:
- larch plantation /
- knot /
- internal characteristics /
- model /
- wood quality
-
[1] TU J, LIU Q.Branch growth of Pinus elliottii in the hilly red-soil area of the mid-subtropical climatic zone[J].Journal of Zhejiang Forestry College, 2007,24(2):162-167. [2] CHMURA D J, RAHMAN M S, TIOELKER M G. Crown structure and biomass allocation patterns modulate aboveground productivity in young loblolly pine and slash pine[J]. Forest Ecology and Management, 2007, 243(2/3):219-230. [3] LIU Z G, LI F R. Modeling of spatial distribution of primary branches within the crowns of Pinus sylvestris stands[J]. Scientia Silvae Sinicae, 2007, 43(10):19-27. [4] 涂洁, 刘琪. 中亚热带红壤丘陵区湿地松枝条生长规律[J].浙江林学院学报, 2007, 24(2): 162-167. [5] GB/T144—2003 Log measurements[S].Beijing: China Standards Press, 2004. [6] 刘兆刚,李凤日. 樟子松人工林树冠内一级枝条空间的分布规律[J].林业科学,2007, 43(10):19-27. [7] EN 1316-1—1997. Hardwood round timber-qualitative classification-oak and beech[S]. Brussels: European Committee for Standardization, 1997. [8] JIANG S W, JIA W W. Study on knot size of Larix olgensis Hengy in plantation in eastern area of Heilongjiang Province[J]. Forest Resources Management, 2008(5):79-85. [9] CHEN D S, JIN Z Y, LI F R, et al. Knot size and distribution of mongolian pine plantations[J]. Journal of Northeast Forestry University, 2007, 35(5):19-21. [10] GB/T144—2003 原木检验 [S].北京:中国标准出版社,2004. [11] SHIGO A L. A new tree biology[M]. Durham: Shigo and Trees Associates, 1989. [12] CHEN D S, LI F R, SUN X M, et al.Models to predict knot size for larch plantation using linear mixed model[J]. Scientia Silvae Sinicae, 2011, 47(11):121-128. [13] State Forestry Administration. The seventh forest resource survey report[R]. Beijing: China Forestry Publishing House, 2011. [14] LAMSA P, KELLOMAKI S, VAISANEN H. Nuorten mantyjen oksikkuuden riippuuvuus puuston rakenteesta ja kasvupaikan viljavuudesta[J]. Folia Forest, 1990,746:1-22. [15] HAGG A, WESLIEN H. Samband mellan tallens (Pinus sylvestris) naturliga grenrensing och standorten[C]. Uppsala: Swedish University of Agricultural Science, 1995:25-41. [16] LIU Z G, LI F R.The three dimensional visualization simulation system of larch plantation(3D Tree For Larix 1.0v): China, 2010SR000440[P]. 2010-01-05. [17] MOBERG L. Variation in knot size of Pinus sylvestris in two initial spacing trials[J]. Silva Fennica, 1999, 33: 131-144. [18] MOBERG L. Models of internal knot diameter for Pinus sylvestris[J]. Scandinavian Journal of Forest Research, 2000,15:177-187. [19] MOBERG L. Predicting knot properties of Picea abies and Pinus sylvestris from generic tree descriptors[J]. Scandinavian Journal of Forest Research, 2006,21(Suppl. 7):49-62. [20] HEIN S. Knot attributes and occlusion of naturally pruned branches of Fagus sylvatica[J]. Forest Ecology and Management,2008,256: 2046-2057. [21] 姜生伟,贾炜玮.黑龙江东部地区落叶松人工林节子大小的研究[J]. 林业资源管理,2008(5):79-85. [22] JIA W W, LI F R, JIANG L C. Modeling knot properties for mongolian pine in northeast China[J]. Journal of Korean Forestry Society, 2008,97(5):485-491. [23] 陈东升,金钟跃,李凤日,等.落叶松节子大小和分布[J].东北林业大学学报,2007,35(5):19-21. [24] 陈东升,李凤日,孙晓梅,等.基于线性混合模型的落叶松人工林节子大小预测模型[J].林业科学,2011,47(11):121-128. [25] 国家林业局. 第七次森林资源调查报告[R].北京:中国林业出版社,2011. [26] 刘兆刚,李凤日. 落叶松人工林动态三维可视化模拟系统软件(3D Tree For Larix 1.0v):中国,2010SR000440[P]. 2010-01-05. [27] DIETRICH G. Branch formation and natural pruning in silver fir[J]. Forstwissenschaftliche Forschungen, 1973, 34:91-95 [28] LI F R, CHOI J K, KIM J H. The development of growth and yield models for the natural broadleaved-Korean pine forests in northeast China[J]. Journal of Korean Forestry Society, 2001, 90(5): 650-662. [29] DELEUZE C, HERVÉ J C, COLIN F, et al. Modelling crown shape of Picea abies: spacing effects[J]. Canadian Journal of Forest Research, 1996, 26: 1957-1966. [30] COLIN F, HOULLIER F. Branchiness of Norway spruce in northeastern France: predicting the main crown characteristics from usual tree measurements[J]. Annals of Forest Science, 1992,49: 511-538. [31] ROEH R L, MAGUIRE D A. Crown profile models based on branch attributes in coastal Douglas-fir[J]. Forest Ecology and Management,1997, 96 :77-100. [32] HEIN S, SPIECKER H. Comparative analysis of occluded branch characteristics for Fraxinus excelsior and Acer pseudoplatanus with natural and artiflcial pruning[J]. Canadian Journal of Forest Science, 2007,37:1414-1426. [33] KARKKAINEN M. Model for knottiness of wood in pine, spruce and birch[J]. Silva Fennica, 1986, 20:107-116. [34] MAGUIRE D A, KERSHAW J A, HANN D A. Predicting the effects of silvicultural regime on branch size and crown wood core in Douglas-fir[J]. Forest Science, 1991,37:1409-1428. [35] VESTOL G I, HØIBØ O A. Prediction of knot diameter in Picea abies (L.) Karst[J]. Holz als Roh und Werkstoff, 2001,59:129-136. [36] MOBERG L. Models of internal knot properties for Picea abies[J]. Forest Ecology and Management, 2001, 147:123-138. [37] OJA J. Evaluation of knot parameters measured automatically in CT-images of Norway spruce (Picea abies (L.)Karst.)[J]. Holz als Roh und Werkstoff, 2000,58:375-379. [38] GRUNDBERG S. An X-ray log scanner: a tool for control of the sawmill process [D]. Skelleftea, Sweden: Division of Wood Technology, Lulea University of Technology, 1999:37. -

计量
- 文章访问数: 4812
- HTML全文浏览量: 45
- PDF下载量: 12
- 被引次数: 0