Effects of silicate impregnation modification on visual physical parameters of Chinese fir wood

Li Ping; Zhang Yuan; Wu Yiqiang; Lü Jianxiong; Yuan Guangming; Zuo Yingfeng

doi:10.12171/j.1000-1522.20200189

Journal of Beijing Forestry University > 2020 > 42(9): 122-129. > DOI: 10.12171/j.1000-1522.20200189

Li Ping, Zhang Yuan, Wu Yiqiang, Lü Jianxiong, Yuan Guangming, Zuo Yingfeng. Effects of silicate impregnation modification on visual physical parameters of Chinese fir wood[J]. Journal of Beijing Forestry University, 2020, 42(9): 122-129. DOI: 10.12171/j.1000-1522.20200189

Citation:

PDF (1322 KB)

Effects of silicate impregnation modification on visual physical parameters of Chinese fir wood

1.
College of Materials Science and Engineering, Central South University of Forestry and Technology, Changsha 410004, Hunan, China
2.
College of Art and Design, Xiangnan University, Chenzhou 423000, Hunan, China
3.
Research Institute of Wood Industry, Chinese Academy of Forestry, Beijing 100091, China

More Information

Received Date: June 18, 2020
Revised Date: July 06, 2020
Available Online: September 08, 2020
Published Date: September 29, 2020

Graphical Abstract

Abstract

Abstract

Objective The color, glossiness and texture of plain-sawed and quarter-sawed lumber of unmodified and silicate modified wood were measured and compared, and the effects of silicate modified treatment on the visual characteristics of Chinese fir wood were analyzed. The purpose was to provide theoretical basis for the large-scale application of silicate modified wood, guide the research and development of related products of modified Chinese fir wood.
Method By means of colorimeter, glossmeter and other experimental equipment, the L*a*b* value, glossiness and texture of plain-sawed and quarter-sawed lumber with a specification of 100 mm × 100 mm × 20 mm before and after modification were measured at room temperature, and the changing rule of visual physical parameters of the wood was analyzed.
Result (1) After modification, the red green value (a*) distribution intervals of the plain-sawed and quarter-sawed lumber were 2.0−6.0, 2.5−5.5, respectively, and the yellow blue chroma value (b*) distribution intervals were 17.5−24.0, 18.0−24.0, respectively. The two groups of data were smaller than the unmodified wood. The distribution range of lightness (L) value also decreased to 61.0−71.0, indicating that the modification had a balanced color tendency and a certain influence on the lightness and darkness of Chinese fir. (2) The parallel incident glossiness (GZL), vertical incident glossiness (GZT) and glossiness ratio (GZB) of unmodified wood were 5.54%, 4.32% and 1.28, respectively, and the GZL, GZT and GZB of modified Chinese fir were 3.32%, 2.86% and 1.16, respectively. The parallel grain glossiness GZL of the two kinds of wood was slightly higher than the straight grain glossiness GZT, showing a certain linear relationship. After modification, the linear trend of glossiness was more obvious, and the data were more centralized. (3) The texture roughness, spacing and density of the modified wood were 0.55 mm, 9.51 mm and 0.06, respectively, which showed that the modification had no effect on the wood texture. The gray distribution interval of the grain and background of the modified wood was lower than that of the unmodified wood, indicating that the modified wood made the gray level of the texture and background of the wood higher. The distribution of grain and background gray level of modified wood was looser than that of the unmodified wood. Though they had a certain linear relationship, while they were not compact.
Conclusion Silicate modification has little effect on wood color, and the wood basically maintaines its original color characteristics. In glossiness, the modified wood is slightly smaller than the unmodified wood, and the basic distribution law is the same. The effect of the modification on the grain spacing and the grain thickness is weak. The grain density of the modified wood is still the same as that of the unmodified wood. The difference between the gray value of the modified wood grain and the background gray value becomes larger, and the contrast is slightly higher, which makes the grain of the modified wood more obvious than that of the unmodified wood.
- Chinese fir wood,
- silicate,
- impregnation modification,
- wood color,
- glossiness,
- texture

FullText(HTML)

References (18)

References

[1]	李萍, 左迎峰, 吴义强, 等. 家具和地板用浸渍改性杉木研究进展[J]. 林业工程学报, 2016, 1(5):133−138. Li P, Zuo Y F, Wu Y Q, et al. Study on modification of Chinese fir for furniture and floor by resin impregnation[J]. China Forestry Science and Technology, 2016, 1(5): 133−138.
[2]	王雯, 田健夫, 彭尧. 速生杉木改性技术研究进展[J]. 林产工业, 2019, 56(11):52−55. Wang W, Tian J F, Peng Y. Research progress on modification technologies of fast-growing Chinese fir[J]. China Forest Products Industry, 2019, 56(11): 52−55.
[3]	Yue K, Wu J, Xu L, et al. Use impregnation and densification to improve mechanical properties and combustion performance of Chinese fir[J/OL]. Construction and Building Materials, 2020, 241: 118101. [2019−12−02]. http://DOI:10.1016/j.conbuildmat.2020.118101" target="_blank">10.1016/j.conbuildmat.2020.118101">http://DOI:10.1016/j.conbuildmat.2020.118101.
[4]	Esteves B M, Pereira H M. Wood modification by heat treatment: a review[J]. Bioresources, 2009, 4(1): 370−404.
[5]	Cao Y, Lu J, Huang R, et al. Increased dimensional stability of Chinese fir through steam-heat treatment[J]. European Journal of Wood & Wood Products, 2012, 70(4): 441−444.
[6]	黄艳辉, 费本华, 赵荣军. 低分子量酚醛树脂处理对杉木细胞壁的改性机理研究[J]. 光谱学与光谱分析, 2015, 35(12):3356−3359. Huang Y H, Fei B H, Zhao R J. Modified mechanism of cell walls from Chinese fir treated with low-molecular-weight phenol formaldehyde resin[J]. Spectroscopy and Spectral Analysis, 2015, 35(12): 3356−3359.
[7]	Furuno T, Imamura Y, Kajita H. The modification of wood by treatment with low molecular weight phenol-formaldehyde resin: a properties enhancement with neutralized phenolic-resin and resin penetration into wood cell walls[J]. Wood Science and Technology, 2004, 37(5): 349−361. doi: 10.1007/s00226-003-0176-6
[8]	Xie Y, Fu Q, Wang Q, et al. Effects of chemical modification on the mechanical properties of wood[J]. European Journal of Wood and Wood Products, 2013, 71(4): 401−416. doi: 10.1007/s00107-013-0693-4
[9]	Xie Y, Xu J, Militz H, et al. Thermo-oxidative decomposition and combustion behavior of Scots pine (Pinus sylvestris L.) sapwood modified with phenol- and melamine-formaldehyde resins[J]. Wood Science and Technology, 2016, 50(6): 1125−1143. doi: 10.1007/s00226-016-0857-6
[10]	袁玉洁, 吴智慧. 速生材改性技术及其在家居木制品中的应用研究[J]. 家具, 2016, 37(3):9−13, 17. Yuan Y J, Wu Z H. Application of modified fast-growing wood in furniture and wood products[J]. Furniture, 2016, 37(3): 9−13, 17.
[11]	周亚, 李萍, 左迎峰, 等. 无机质增强木材研究进展与发展趋势[J]. 材料导报, 2019, 33(17):2989−2996. Zhou Y, Li P, Zuo Y F, et al. Research progress and development trend of inorganic reinforced wood[J]. Materials Review, 2019, 33(17): 2989−2996.
[12]	王奉强, 隋芳, 廖恒, 等. 硅酸盐改性木材的力学与阻燃性能[J]. 消防科学与技术, 2014, 33(6):688−690. Wang F Q, Sui F, Liao H, et al. Mechanical properties and fire retardance of wood modified by silicates[J]. Fire Science and Technology, 2014, 33(6): 688−690.
[13]	郑雅娴, 吕文华, 许茂松. 树脂型无机硅酸盐浸渍改性人工林杉木的性能[J]. 木材工业, 2015, 29(6):36−39. Zheng Y X, Lü W H, Xu M S. Properties of Chinese fir modified with inorganic silicate resin[J]. China Wood Industry, 2015, 29(6): 36−39.
[14]	Li P, Zhang Y, Zuo Y, et al. Preparation and characterization of sodium silicate impregnated Chinese fir wood with high strength, water resistance, flame retardant and smoke suppression[J]. Journal of Materials Research and Technology, 2020, 9(1): 1043−1053. doi: 10.1016/j.jmrt.2019.10.035
[15]	王霁媛, 张亚池. 改性速生杨的视觉物理量分析[J]. 家具, 2013, 34(3):18−21. Wang J Y, Zhang Y C. The analysis on visual physical magnitude of the modified fast-growing poplar[J]. Furniture, 2013, 34(3): 18−21.
[16]	仇芝萍. 径向木纹视觉特性研究[D]. 南京: 南京林业大学, 2011. Qiu Z P. The study on visual characteristics of radial texture of wood[D]. Nanjing: Nanjing Forestry University, 2011.
[17]	于海鹏. 基于数字图像处理学的木材纹理定量化研究[D]. 哈尔滨: 东北林业大学, 2005. Yu H P. Quantitation of wood texture by digital image processing[D]. Harbin: Northeast Forestry University, 2005.
[18]	刘一星, 李坚, 徐子才, 等. 我国110个树种木材表面视觉物理量的综合统计分析[J]. 林业科学, 1995, 31(4):353−359. Liu Y X, Li J, Xu Z C, et al. Synthetical statistics analysis on visual physics magnitude (VPM) of the surface of 110 Chinese wood species[J]. Scientia Silvae Sinicae, 1995, 31(4): 353−359.

Cited By

Cited by

Periodical cited type(2)

1.	薛雨，姚金明，卢庆辉，杨忍. 基于NDVI和深度学习的多源影像冬小麦提取研究. 现代信息科技. 2023(02): 120-122 .
2.	陈玉麟，田茂元. 提升江津区林业碳汇能力的思考. 林业勘查设计. 2023(03): 71-75 .

Other cited types(3)

Get Citation

PDF

XML

Article views (1344) PDF downloads (50) Cited by(5)

Turn off MathJax

Article Contents

Abstract

References

Effects of silicate impregnation modification on visual physical parameters of Chinese fir wood

Abstract

References

Cited by

Periodical cited type(2)

Other cited types(3)

Catalog

Export File

Citation

Format

Content