• Scopus
  • Chinese Science Citation Database (CSCD)
  • A Guide to the Core Journal of China
  • CSTPCD
  • F5000 Frontrunner
  • RCCSE
Advanced search
Li Wanzhao, Zhang Zheng, Peng Junyi, Wang Xinzhou, Shi Jiangtao, Mei Changtong. Exploring the internal deformation of wood under loading based on X-ray CT[J]. Journal of Beijing Forestry University, 2021, 43(2): 160-164. DOI: 10.12171/j.1000-1522.20200290
Citation: Li Wanzhao, Zhang Zheng, Peng Junyi, Wang Xinzhou, Shi Jiangtao, Mei Changtong. Exploring the internal deformation of wood under loading based on X-ray CT[J]. Journal of Beijing Forestry University, 2021, 43(2): 160-164. DOI: 10.12171/j.1000-1522.20200290

Exploring the internal deformation of wood under loading based on X-ray CT

More Information
  • Received Date: October 19, 2020
  • Revised Date: October 28, 2020
  • Available Online: December 17, 2020
  • Published Date: February 23, 2021
  •   Objective  Wood is easy to process and has high strength/mass ratio. It has been widely applied in the decoration and construction fields in solid wood as well as wood-based panel formats. As bio-based porous materials, the internal structure of wood is prone to change in compression conditions, which has an essential impact on the mechanical performance of wood based materials. Hence, it is important to understand the interaction between loading force and internal deformation of wood. This shall contribute to better understand and evaluate the mechanical performances of wood.
      Method  In order to study the internal structure changes of wood, samples from Douglas fir and poplar based panels were prepared. X-ray computed tomography (X-ray CT) was used to periodically monitor the internal structure of samples when they were compressed by a customized loading cell. X-ray CT was able to visualize the 3D internal structural changes of samples during compression. The compression conditions of customized load cell could be controlled by both loading wedge movement and loading force. Based on the results from X-ray CT and loading cell, the mechanisms of mechanical performance of solid wood and glued panels were discussed.
      Result  The stiffness of Douglas fir was much higher than that of poplar. Density increase in Douglas fir sample mainly occurred in earlywood and density increase in latewood was found only when loading reaching 25.26 MPa. Regional stress accumulation was the main cause of internal structure changes. Structural changes could be re-distributed as increasing the stress. The existence of glue can significantly enhance the stiffness of wood and we found that the morphology of wood vessels adjacent to the glue line was kept well during compression. Large vessels were prone to be collapsed during compression and route of collapsing was parallel to the growth ring. Internal structure changes in latewood mainly occurred as the squeeze of resin canals and the crack of rays.
      Conclusion  The results obtained from this study could be used in optimizing the processing technology and application approaches of wood and wood based materials. Combining the X-ray CT and loading cell is a promising way to reveal the mechanisms of wood based materials under loading. In order to further reveal the internal structure changes in wood cell wall, studies with even better resolution are required. Hence, a possible solution is to combine X-ray CT with other techniques that can reach the nano-scale resolutions.
  • [1]
    Satoshi F, Keita O, Masaki N, et al. Shear properties of metal-free wooden load-bearing walls using plywood jointed with a combination of adhesive tape and wood dowels[J]. European Journal of Wood and Wood Products, 2016, 75(3): 1−9.
    [2]
    Dukarska D, Czarnecki R, Dziurka D, et al. Construction particleboards made from rapeseed straw glued with hybrid pMDI/PF resin[J]. European Journal of Wood and Wood Products, 2017, 75(2): 175−184.
    [3]
    吕超, 詹天翼, 王旋, 等. 木材内部水分扩散特性研究现状及发展趋势[J]. 世界林业研究, 2019, 32(6):43−48.

    Lü C, Zhan T Y, Wang X, et al. A review and development of water diffusion characteristics in wood[J]. World Forestry Research, 2019, 32(6): 43−48.
    [4]
    詹天翼, 蒯炳斌, 吕超, 等. 杨木和杉木横纹抗拉强度的含水率依存性[J]. 林业工程学报, 2019, 4(5):34−39.

    Zhan T Y, Kuai B B, Lü C, et al. Moisture dependence of the tensile strength perpendicular to grain of poplar and Chinese fir[J]. Journal of Forestry and Engineering, 2019, 4(5): 34−39.
    [5]
    Ong H R, Khan M R, Prasad D M, et al. Palm kernel meal as a melamine urea formaldehyde adhesive filler for plywood applications[J]. International Journal of Adhesion and Adhesives, 2018, 85(10): 8−14.
    [6]
    Najafi S K, Sharifnia H, Najafabadi M A, et al. Acoustic emission characterization of failure mechanisms in oriented strand board using wavelet-based and unsupervised clustering methods[J]. Wood Science and Technology, 2017, 51(6): 1433−1446.
    [7]
    Li W Z, van den Bulcke J, Mannes D, et al. Impact of internal structure on water-resistance of plywood studied using neutron radiography and X-ray tomography[J]. Construction and Building Materials, 2014, 73(24): 171−179.
    [8]
    Baekyong C, Khoirul H S, Tsuyoshi Y. Quantitative observation of the foraging tunnels in Sitka spruce and Japanese cypress caused by the drywood termite Incisitermes minor (Hagen) by 2D and 3D X-ray computer tomography (CT)[J]. Holzforschung, 2017, 33(6): 211−220.
    [9]
    李万兆, 陈玉瑜, 梅长彤. 胶合板层间水分迁移规律的研究[J]. 林业工程学报, 2019, 4(5):29−33.

    Li W Z, Chen Y Y, Mei C T. Exploration of water transport behavior among layers in plywood[J]. Journal of Forestry Engineering, 2019, 4(5): 29−33.
    [10]
    Li W Z, van den Bulcke J, Dhaene J, et al. Investigating the interaction between internal structural changes and water sorption of MDF and OSB using X-ray computed tomography[J]. Wood Science and Technology, 2018, 52(3): 701−716.
    [11]
    李万兆, 詹先旭, 杨勇, 等. 木质人造板吸水过程中内部单元体尺寸及相对位置的变化[J]. 林业工程学报, 2018, 3(3):24−28.

    Li W Z, Zhan X X, Yang Y, et al. Changes of size and relative position of the internal unit during water uptake of wood-based panels[J]. Journal of Forestry Engineering, 2018, 3(3): 24−28.
    [12]
    Deklerck V, de Mil T, Kondjo P, et al. Sleeping beauties in materials science: unlocking the value of xylarium specimens in the search for timbers of the future[J]. Holzforschung, 2019, 73(10): 889−897.
    [13]
    Li W Z, van den Bulcke J, de Schryver T, et al. Investigating water transport in MDF and OSB using a gantry-based X-ray CT scanning system[J]. Wood Science and Technology, 2016, 50(6): 1197−1211.
    [14]
    Wang X Z, Zhao L G, Deng Y H, et al. Effect of the penetration of isocyanates (pMDI) on the nanomechanics of wood cell wall evaluated by AFM-IR and nanoindentation (NI)[J]. Holzforschung, 2018, 72(4): 301−309.
  • Cited by

    Periodical cited type(0)

    Other cited types(1)

Catalog

    Article views (1288) PDF downloads (60) Cited by(1)

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return