Citation: | Guan Cheng, Xin Zhenbo, Liu Jinhao, Zhang Houjiang, Zhou Jianhui, Li Huan, Liu Suyang. Modal sensitivity and vibration mode of full-size oriented strand board panel under three boundary conditions[J]. Journal of Beijing Forestry University, 2021, 43(12): 105-115. DOI: 10.12171/j.1000-1522.20210264 |
[1] |
肖再然, 申伟, 刘振东. 中国定向刨花板市场[J]. 国际木业, 2020, 50(3):41−43. doi: 10.3969/j.issn.1671-4911.2020.03.010
Xiao Z R, Shen W, Liu Z D. Wood-based panels-oriented strand board (OSB) market of China[J]. International Wood Industry, 2020, 50(3): 41−43. doi: 10.3969/j.issn.1671-4911.2020.03.010
|
[2] |
王正, 付海燕, 丁叶蔚, 等. 定向刨花板剪切模量和弹性模量动态测试[J]. 林业科学, 2019, 55(8):136−146. doi: 10.11707/j.1001-7488.20190815
Wang Z, Fu H Y, Ding Y W, et al. Dynamic testing of shear modulus and elastic modulus of oriented strand board[J]. Scientia Silvae Sinicae, 2019, 55(8): 136−146. doi: 10.11707/j.1001-7488.20190815
|
[3] |
全国人造板标准化技术委员会. 定向刨花板: LY/T 1580—2010 [S]. 北京: 国家林业局, 2010.
National Technical Committee on Wood-Based Panels Standardization of China. Oriented strand board: LY/T 1580−2010[S]. Beijing: State Forestry Administration, 2010.
|
[4] |
Larsson D. Using modal analysis for estimation of anisotropic material constants[J]. Journal of Engineering Mechanics, 1997, 123(3): 222−229. doi: 10.1061/(ASCE)0733-9399(1997)123:3(222)
|
[5] |
Zhou J H, Chui Y H, Gong M, et al. Comparative study on measurement of elastic constants of wood-based panels using modal testing: choice of boundary conditions and calculation methods[J]. Journal of Wood Science, 2017, 63(5): 1−16.
|
[6] |
Zhou J H, Chui Y H, Gong M, et al. Simultaneous measurement of elastic constants of full-size engineered wood panels by modal testing[J]. Holzforschung, 2016, 70(7): 673−682. doi: 10.1515/hf-2015-0117
|
[7] |
李焕. 足尺人造板弹性常数的振动检测研究[D]. 北京: 北京林业大学, 2021.
Li H. Study on determining elastic constants of full-size wood composite panels using vibration methods [D]. Beijing: Beijing Forestry University, 2021.
|
[8] |
周卢婧. 基于双节线简支振动原理的足尺人造板力学性能检测方法研究[D]. 北京: 北京林业大学, 2018.
Zhou L J. Nodal line simply supported vibration method for evaluating the mechanical properties of full-size wood composite panels [D]. Beijing: Beijing Forestry University, 2018.
|
[9] |
管成, 刘晋浩, 张厚江, 等. 足尺人造板力学性能无损检测研究进展[J]. 北京林业大学学报, 2019, 41(9):164−172.
Guan C, Liu J H, Zhang H J, et al. Literature review of mechanical properties of full-size wood composite panels using nondestructive testing technique[J]. Journal of Beijing Forestry University, 2019, 41(9): 164−172.
|
[10] |
管成. 面向力学性能评估的足尺人造板四节点支承振动检测研究[D]. 北京: 北京林业大学, 2018.
Guan C. Evaluation of mechanical properties of full-size wood composite panels supported on four nodes using vibration methods [D]. Beijing: Beijing Forestry University, 2018.
|
[11] |
全国人造板标准化技术委员会. 人造板及饰面人造板理化性能试验方法: GB/T 17657—2013[S]. 北京: 中国标准出版社, 2014.
National Technical Committee on Wood-Based Panels Standardization of China. Test methods of evaluating the properties of wood-based panels and surfaces decorated wood-based panels: GB/T 17657—2013[S]. Beijing: Standards Press of China, 2014.
|
[12] |
李焕, 管成, 张厚江, 等. 足尺胶合板弹性模量的两对边简支振动检测研究[J]. 北京林业大学学报, 2021, 43(2):138−149.
Li H, Guan C, Zhang H J, et al. Determining modulus of elasticity of full-size plywood panel simply supported on two opposite sides using a vibration method[J]. Journal of Beijing Forestry University, 2021, 43(2): 138−149.
|
[13] |
Ayorinde E O. On the sensitivity of derived elastic constants to the utilized modes in the vibration testing of composite plates[J]. Journal of Applied Mechanics, 1995, 211: 55−64.
|
[14] |
曹树谦, 张文德. 振动结构模态分析—理论实验与应用[M]. 天津: 天津大学出版社, 2001.
Cao S Q, Zhang W D. Modal analysis of vibrating structures: theoretical experiments and applications [M]. Tianjin: Tianjin University Press, 2001.
|
[15] |
丁源. ABAQUS6.14中文版有限元分析从入门到精通[M]. 北京: 清华大学出版社, 2016.
Ding Y. ABAQUS6.14 Chinese version of finite element analysis from entry to master [M]. Beijing: Tsinghua University Press, 2016.
|
[16] |
Ewins D J. Modal testing: theory and practice[M]. Letchworth: Research Studies Press Limited, 1986.
|
[17] |
Guan C, Zhang H J, Wang X P, et al. Experimental and theoretical modal analysis of full-sized wood composite panels supported on four nodes[J]. Materials, 2017, 10(6): 683. doi: 10.3390/ma10060683
|
[18] |
Thomas W H. Poisson’s ratios of an oriented strand board[J]. Wood Science and Technology, 2003, 37(3−4): 259−268. doi: 10.1007/s00226-003-0171-y
|